Kellyware KCam v4.0.21 英文正式版(鑽床/銑床控制軟體)


-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
軟體名稱:Kellyware KCam v4.0.21 英文正式版(鑽床/銑床控制軟體)
語系版本:英文版
光碟片數:單片裝
破解說明:
系統支援:WIN 9x/WIN ME/WIN NT/WIN 2000/WIN XP/WIN 2003
軟體類型:鑽床/銑床控制軟體
硬體需求:PC
更新日期:2007/5/31
官方網站:http://www.kellyware.com/kcam
中文網站:http://www.kellyware.com/kcam
軟體簡介:
銷售價格:80
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=




軟體簡介:

Kellyware KCam v4.0.21 英文正式版(鑽床/銑床控制軟體)


安裝序號:
Name---: BEAN
Serial-: 0008-1115-081C 

    
中文化說明:

內容說明:
KCam 是一套為 CNC 設備而設計且低成本的鑽床、銑床控制軟體，透過它的 Gcode
編輯畫面設計你的工作路徑，或匯入 DXF、NC 與 PLT 資料。由電腦輔助設計軟體
設計圖板再匯入 KCam ，雙重切割深度是為了保證在鑽銑後的外緣與洞，可省下多
在正式操作前的練習

英文說明:                                  
KCam 4 Router/Mill software is designed to run low cost hobby CNC 
equipment. Program your paths using the built in Gcode editor, or import 
DXF, NC, and PLT files. Create signs and plates using your CAD software 
and import your work into KCam. Dual cutting depth allows for holes and 
outlines to be punched out after routing. No more drilling holes for 
switches or cutting plates to size before engraving. 

Engrave signs, make name tags, drill printed circuit boards, mill parts, 
plasma cuts, plot pictures onto paper...

Here are a few of the key features:
- Load GM code files
- Import Excellon ASCII drill files (.NC)
- Import DXF files (.DXF)
- Import HPGL files (.PLT)
- Import Gerber files(.GB0)
- Edit/Write GM code files
- 3D Graphical Viewer w/ Zoom, Pan and Table Views
- Manual Jogging motor control
- Controller and Table setup features
- Supports Parallel Port (LPT) Stepper Motor Controllers
- Selectable Feed Rate
- Backlash Compensation
- Windows 95/98/NT/2000 32bit Software
- PCB Isolation conversion from Gerber(RS274X) files
- Constant Velocity Contouring
- Multiple Machine Setups  



-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=