Moldflow Design Link V5.0 英文光碟正式版 (在MPA軟體和優秀的CAD系統之間提供了幾何資料介面)


-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
軟體名稱:Moldflow Design Link V5.0 英文光碟正式版 (在MPA軟體和優秀的CAD系統之間提供了幾何資料介面)
語系版本:英文版
光碟片數:單片裝
破解說明:
系統支援:WIN 9x/WIN ME/WIN NT/WIN 2000/WIN XP/WIN 2003
軟體類型:在MPA軟體和優秀的CAD系統之間提供了幾何資料介面
硬體需求:PC
更新日期:2005/3/7
官方網站:
中文網站:
軟體簡介:
銷售價格:80
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=




破解說明:安裝前請先閱讀LEGEND資料夾內install.txt文件檔，即可完成安裝。



軟體簡介:

Moldflow Design Link V5.0 英文光碟正式版 (在MPA軟體和優秀的CAD系統之間提供了幾何資料介面) 


內容說明:

Moldflow Design Link(MDL) 能夠用於直接地輸入CAD幾何學模型於Moldflow Plastics 
Advisers及Plastics Insight中。通過使用標準的幾何格式，包括IGES, STEP和
Parasolid，還有允許直接輸入MPA的 Pro/ENGINEER 和 CATIA  V5 模型檔，在MPA軟體
和優秀的CAD系統之間提供了幾何資料介面。


Moldflow Design Link

Moldflow Design LinkT (MDLT) provides faster and easier access to CAD data by
allowing users to import leading solid geometry formats directly into
Moldflow Plastics Advisers (MPA), Moldflow Plastics Insight (MPI), and
Moldflow Magics STL ExpertT software.

This gives users the flexibility to accept CAD data from almost any source,
and it also provides the added benefit of using native CAD data from all
Parasolid-based CAD systems, Pro/ENGINEER, CATIA V5 and SolidWorks.

MDL is commercially available in three versions:
 * MDL/Parasolid - for the import of Parasolid, SolidWorks, IGES, and STEP
   models
 * MDL/Pro/ENGINEER - for the import of Pro/ENGINEER part, IGES, and STEP
   models
 * MDL/CATIA V5 - for the import of CATIA V5 part models

Capabilities

When MDL is used with Moldflow Magics STL Expert software, the CAD solid
model is converted to a STL model format which can then be fixed and
optimized for use in a MPA or MPI analysis

When MDL is used with MPA software, the CAD solid model is automatically
converted to the MPA model format

When MDL is used with MPI software, the CAD solid model can be
automatically converted to the MPI mesh format, or the surfaces can be
imported and subsequently meshed using MPI/Synergy's advanced meshing
capabilities
 * Imported geometry is represented in MPI/Synergy as trimmed NURBS surfaces
 * These surfaces can be independently viewed, grouped, or meshed
 * NURBS surfaces are supported by the IGES, STEP, Parasolid, Pro/ENGINEER,
 CATIA V5, and SolidWorks file formats

Supported Model Formats
Parasolid file support - native Parasolid models created in any
Parasolid-compatible CAD system, including Unigraphics, Solid Edge, IronCAD,
and TopCad and saved in Parasolid versions up to and including version 16.0

Pro/ENGINEER file support - native Pro/ENGINEER part files created in
versions up to and including Wildfire 2.0

CATIA V5 file support - native CATIA V5 part files created in versions up to
and including V5R13 (Release 13)

SolidWorks file support - native SolidWorks part models created in versions
2004 and 2005

STEP file support - STEP AP203 and STEP AP214 Class II, Class III, Class IV,
Class V entities and Class VI entities and assemblies

IGES file support - closed volume IGES files with an extended list of
supported entities



-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=